Erica Sugimoto Network Operations Center Engineer at NTT-ME 星貴雄.

• Test VID/PID (See below) 0x03EB. Mouse Demo Application. Keyboard Demo Application.
• Windows device driver information for Compaq NC3121 Fast Ethernet NIC. Compaq NC3121 Fast Ethernet NIC is a network interface controller produced by Compaq and HP. It features Wake on LAN (WOL) which enables personal computers to be remotely powered for after hours as well remote-site maintenance.
• Windows device driver information for 82562EH based Phoneline Network Connection. 82562EH based Phoneline Network Connection is one of those devices that does not have much information. 82562EH uses a technology known as a proxy server - allowing a single Internet connection of any type via Dialup, DSL, Cable modem or satellite connection not only into one but to several computers in one home.
• It runs on such operating systems as Windows 98, Windows ME, Windows 2000, Windows NT4, Windows XP and Windows 2003. This device comes with a user manual to guide users through all the steps of installation and use. It is a cost effective choice of fax modem.

The wi driver provides support for wireless network adapters based around the Lucent Hermes, Intersil PRISM-2, Intersil PRISM-2.5, Intersil PRISM-3, and Symbol Spectrum24 chipsets. All five chipsets provide a similar interface to the driver.

The wi driver encapsulates all IP and ARP traffic as 802.11 frames, though it can receive either 802.11 or 802.3 frames. Transmit speed is selectable between 1Mbps fixed, 2Mbps fixed, 2Mbps with auto fallback, 5.5Mbps, 8Mbps, or 11Mbps, depending on hardware.

Drivers Ntt-me Network & Wireless Cards Online

These are the modes the wi driver can operate in:

BSS mode

Also known as infrastructure mode, this is used when associating with an access point, through which all traffic passes. This mode is the default.

IBSS mode

Also known as IEEE ad-hoc mode or peer-to-peer mode. This is the standardized method of operating without an access point. Stations associate with a service set. However, actual connections between stations are peer-to-peer as in ad-hoc mode. Cards with very old firmware revisions do not support this mode.

IBSS master

Also know as Host IBSS mode. In this mode the station takes on part of the role of an access point, though traffic does not pass through it to reach the other stations. When a group of stations are operating in IBSS mode, one of them must be the master, specifying the network name of the service set.

Host AP

In this mode the driver acts as an access point (base station) for other cards. Only cards based on the Intersil chipsets support this mode. Furthermore, this mode is not supported on USB devices.

ad-hoc mode

More accurately known as ad-hoc demo mode. This mode does not require an access point; the adapter communicates with other ad-hoc stations within range on a peer-to-peer basis. This mode is not specified by the IEEE 802.11 standard and there may be problems interoperating with adapters manufactured by different vendors.

The wi driver can be configured to use both software and hardware Wired Equivalent Privacy (WEP). It is strongly recommended that WEP not be used as the sole mechanism to secure wireless communication, due to serious weaknesses in it.

Drivers Ntt-me Network & Wireless Cards Compatible

The Lucent WaveLAN/IEEE Silver and Gold cards as well as the Intersil and Symbol cards have support for WEP encryption. The WaveLAN Gold as well as newer Intersil and Symbol cards support 104-bit keys, the others only accept 40-bit keys. The Lucent WaveLAN/IEEE Bronze cards do not support WEP at all. See also CAVEATS below.

Drivers Ntt-me Network & Wireless Cards App

Drivers Ntt-me Network & Wireless Cards Customer Service

The wi driver can be configured at runtime with ifconfig(8) or on boot with hostname.if(5).