Download Moore Industries Driver

by



800-876-0036

Formerly:

Phone: 847-356-0566 Fax: 847-356-0747 E-Mail: sales@mmcontrol.com

About Moore Industries: Moore Industries was established in 1968 by its founder and president Leonard W. Moore. Best known for product quality and reliability, Moore Industries is a world leader in the design and manufacture of interface instruments for industrial process control, system integration, and factory automation.

Moore Industries products are used in industries such as: chemical and petrochemical; power generation and transmission; petroleum extraction, refining and transport; pulp and paper; food and beverage; mining and metal refining; pharmaceuticals and biotechnology; industrial machinery and equipment; water and wastewater; and environmental and pollution monitoring.

Process Controllers by Moore Industries precisely control and monitor a temperature, pressure, level, or flow process variable in batch and continuous processes, or back up critical or safety-related loops controlled by PLC, DCS and PC-based systems.


Is local control and indication important to you? If so, this line of controllers and backup stations, available in both 1/4 DIN panel mount and Field mount NEMA 4X versions, may be the answer.

Rugged Construction

  • Thick damage resistant keys
  • Input/output isolation

Operator Interface

  • 3 line vacuum fluorescent display
  • 2 color backlit keys indicate controller state

Applications

  • Single and dual loop PID control for temperature or process applications
  • Feed forward/feedback, Cascade, and Ratio control
  • Chlorination/dechlorination control for water and waste water treatment
  • PID backup and Auto/manual stations that are not a point of failure

Description and Specs

The PowersTM 330 is a 1/8 DIN process monitor with universal input that is multi-functional and microprocessor based. The 330 can function as a panel meter and trip (alarm), or as a panel meter with two trips (alarms), analog transmitter and digital transmitter with the addition of the RS 485 serial communications option.
Description
330R Spec Sheet
Request More Information
The PowersTM 1/4 DIN PLC, DCS, PC Process Controllers Backup Station provide 'bumpless' automatic PID control backup for critical loops controlled by PLC, DCS or PC-based systems by automatically taking control of the loop should the host control signal be lost.
Description
Model 531 Spec Sheet
Request More Information
These multifunction Model 535 1/4 DIN Single Loop Process Controllers provide PID control of any analog process variable (temperature, pressure, level and flow) in batch and continuous process applications.
Description
Model 535 Spec Sheet
Request More Information
535 Profile Controller Option: When a 535 is specified as a profile controller, the SET PT (setpoint key) is replaced at the factory with a RUN key to facilitate operation. Setpoint access is available through use of the DISPLAY key. All functions are described in the manual supplement. The 535 with profile option, provides full ramp and soak capability.
Description
Model 535p Spec Sheet
Request More Information
The 545 1/4 DIN Controller continues with all the features and options found on the Model 535. In addition, PowersTMhas expanded the role the 545 can play in solving your process control needs.
Description
Model 545 Spec Sheet
Request More Information
The 555 1/4 DIN Chlorination Controller provides the water and wastewater treatment industry an automatic and accurate means to control chlorine in potable and wastewater applications.
Description
Model 555 Spec Sheet
Request More Information
Applications where local control and indication are important can now be located almost anywhere eliminating the need to fabricate an instrument cabinet. The Field Mount controller can be mounted to a wall or existing pipe with an optional kit.
Description
OBSOLETE, but M&M can provide a substitute
Request More Information

Can't find what you are looking for?
Call or E-mail Now. . . for Immediate Service, Pricing, and Delivery

* * * 800-876-0036 * * *

Phone: 847-356-0566 Fax: 847-356-0747 E-Mail: sales@mmcontrol.com

WARNING: Some of the products we sell can expose you to chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Contact your sales rep or go to www.P65Warnings.ca.gov for more information.

  • Moore Industries’ Communication Cable Utility can be run to confi gure the Moore Industries’ USB Communication Cable. Moore Industries’ USB Communication Cable provides the interface between a PC USB port and any of Moore Industries’ PC-programmable interface instruments. Important: Figure 1.
  • SEL-3355-2 Drivers and Software, All. This package contains all device drivers and software for SEL-3355-2 Computers with Intel Xeon CPUs. Most 64-bit Windows operating systems are fully supported, while some Linux and 32-bit Windows operating systems are only partially supported (no SEL SysMon or Watchdog support).

All registered trademarks are fully acknowledged by: M&M Control Service, Inc.

M&M Control Service, Inc. does not represent or claim any affiliation, association, connection or approvals with or from any manufacturer unless stated. We fully acknowledge all trademarks and/or names which are pictured and/or listed throughout the M&M Control Service, Inc. Website.

Moore Industries releases TCS temperature transmitter. August 21, 2008 - The TCS Temperature Concentrator System from Moore Industries substantially reduces the cost of transmitting multiple temperature sensor measurements by concentrating up to 32 signals onto a single twisted wire pair. Gate density, however, will continue to increase, which is consistent with Moore’s law. The high value of 10/7nm, however, is a key indicator of the continued scaling within the 3-D domain, with the primary demand driver being the lower power consumption within the smartphone and IoT applications. The frustration among the seafood and meat industries has been stoked by added checks and paperwork requirements which have meant some EU buyers have rejected UK fish altogether. Mark Moore, who is the manager of the Dartmouth Crab Company, told the BBC that his and the other businesses were attempting to “raise awareness” of the new border.

(PowersTM, also known as, POWERS REGULATOR, MCC POWERS, POWERS-FIAT, POWERS PROCESS CONTROLS, CRANE POWERS and POWERS, a Watts Industries Company. The POWERS trademark is owned by Powers, A Division of Watts Water Technologies, Inc. M&M Control Service, Inc. Is a Stocking Distributor for PowersTM)

(All names unintentionally excluded from this list will be included in the next revision upon our notification.)

*This list may vary, as names not appearing on this list are entitled to the acknowledgment of their Trademarks by M&M Control Service, Inc.

Copyright 2021 M&M Control Service Inc., All Rights Reserved

IT Support Services by

Download Moore Industries Driver Jobs

  • August 21, 2008
  • Moore Industries-International, Inc.

Download Moore Industries Driver Portal

August 21, 2008 - The TCS Temperature Concentrator System from Moore Industries substantially reduces the cost of transmitting multiple temperature sensor measurements by concentrating up to 32 signals onto a single twisted wire pair. The system provides a precision measurement at less than 25 percent the cost of using comparable stand-alone smart temperature transmitters. The TCS accepts any combination of RTD, T/C, mV and resistance/potentiometer signal inputs, converts the inputs to the HART digital communications protocol, and transmits the data long distances from the field to the control room on an economical HART digital data link over a twisted wire pair. All process, status and diagnostic information can then be accessed by a HART-based control system.In addition to savings realized in instrument and space costs, the TCS uses HART--or MODBUS RTU with a converter module--for communication from the field to the control room. One twisted wire pair replaces expensive dedicated wires. The TCS, being a loop-powered device, eliminates the need to send power wiring out to the field as well. Using HART, maintenance personnel can access programming and status information for each TCS channel from the control room, or from any termination point using a standard HART hand-held communicator. There’s no need to send someone to remote sites. When used with the optional HMC HART-to- MODBUS Converter, the HMC transmits the HART data as a MODBUS RTU signal, which interfaces with any MODBUS RTU-based PC, PLC or control system.Substantially Reduces Hardware, Wire, and Installation Costs. The TCS eliminates the need to install a dedicated transmitter and twisted wire pair (or expensive sensor extension wires) for each measurement.Universal Input Options. The TCS can be set to accept RTD (2-, 3-, 4-wire; Pt, Cu, Ni); thermocouple (J, K, E, T, R, S, N, B, C); resistance/ potentiometer (0-4000 ohms); and millivolt (-50 to 1000mV) inputs. By using Moore Industries’ free Intelligent PC Configuration Software, custom input linearization can be defined for any input.HART and MODBUS RTU Communications. These standard communication protocols allow easy interface to a wide range of DCS, PLC and computer-based networks. Fault Alarms. The HMC can be programmed via the PC software to provide two relay outputs. The relays can be set to send a master alarm when the HMC detects one, any, or all of the following fault conditions within the system: No HART signal; broken wire; hardware error; bad configuration; input saturated; and input out of table range. The alarms can be set with a time delay, which specifies how long the alarm condition needs to exist before the alarm trips. Failsafe and Non-Failsafe alarm action is also configurable.Versatile Programming. TCS operating parameters can be configured from any HART-based system or, using a standard HART hand-held, from anywhere along the twisted wire pair. The TCS can also be configured using Moore Industries’ free Intelligent PC Configuration Software.“As we all know, manufacturing companies are continuously looking to reduce costs. To do this, some are moving away from stand-alone transmitters to lower cost per point temperature bricks,” says Tina Lockhart, Moore Industries’ Director of Engineering. “Saving real estate also equates to reduced overall costs. At less than 5 inches wide, each of our TCS modules will handle 16 measurements in a fraction of the space required by stand-alone transmitters.” “In developing the TCS, our greatest challenge was to provide our customers with the cost savings they want, yet still maintain the full functionality and exceptional product performance they expect from a Moore Industries temperature transmitter,” Lockhart adds.

Download Moore Industries Driver

Download Moore Industries Drivers

Go to Moore Industries-International, Inc. website
Learn More